Ford Automobiles Forum banner

Parking aid diagnostic

Tags
parkin sensor
453 views 1 reply 2 participants last post by  PURPLE_2L_LX 
#1 · (Edited by Moderator)
Hey lads.

Just switched out my dodgy reverse switch. Works like a charm.

However, when i run a parking sensor diagnostic, i am getting something i can´t figure out.

I move the gear into neutral, turn the key to postion II, slam the gear in reverse, and the diagnose starts.

1. Sound emits: One short beep, one long (3 seconds). This should be the opening sequence for concern diagnostics.

Shortly after this emits:

2. Two short, one long (3 seconds), one second pause, and then tree short beeps.

I used the below chart:

http://www.fordwiki.co.uk/index.php?title=PDC_Park_Distance_Control

I am guessing the last tree beeps is "Left inner sensor", but what is "two short and one long"?

Anyone have any ideas?
 
See less See more
#2 ·
Is it the genuine ford PDC system not an aftermarket one? Do you know which system

you have? Name on the control box?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top