Check engine light keeps comming on every time after dtc's reset.
I have no idea what else to check. I already have cleaned the egr valve, the solenoid seems to be fine, since I can move it manually with Forscan. I swapped the whole egr unit to another car and seems to be working fine...
Hello everyone, my engine died, but Im in poor situation, I cant afford a new car, could get money only for engine swap. So my question would be: can I swap engine with same specifications but with different engine code. For example I drive ford focus dnw 2004 1.8 74kW tdci and my engine code is...
For those who are looking for bypass the A/C pump on a petrol 1.8 engine, this is the reference belt and their specs:
Dayco belt part number 5060775
Rib Profile Straight Rib
Metric Part 6PK1970
Effective Length (in) 77.56
Top Width (in) 0.82
No. of Ribs 6
New to the this so please forgive me if i'm a idiot.
Basically got a mondeo 1.8 petrol manual that just sort of gave up a week back wondering where i should look and if it's fixable.
So i was driving round a roundabout and the engine started misfiring made it about half a mile up...
I have been looking for a while and have had very little luck,
i am trying to find an performance exhaust for the 1.8 petrol mondeo mk3, yet i'm struggling to find any premades meaning i will more then likely have to get a custom one built which aren't cheap.
However i have found...
MOT Expiry Date: 31st March 2019
Tax Expiry Date: 31st March 2019
I have read the rules: Yes
Low mileage 2006 (06) Ford Mondeo 1.8 Edge Petrol Manual. The car has covered just 49,000 miles and has a full service history. The car is in excellent...
My 2005 Mondeo MkIII 1.8 SCI developed an engine management fault, which I've narrowed down to being the upstream lambda sensor. I've been told that the part I need is OZA659-EE43. However, the part on my engine appears to be unusual, and has 5 wires on it: red, white, grey, yellow and...
A couple of weeks ago I replaced the auxiliary belt, tensioner pulley, and idler pulley on a Mondeo MK3 1.8L (pre-facelift, 2003). Lately, I have noticed a persistent "tapping" sound produced somewhere in the aux. belt area. The sound is quite obvious when idling on low RPMs, and...
Hi all, this is my first time posting.
I have had my 60 reg pre-facelift Mondeo Sport tdci, the 1.8 125 engine, for 3 months now.
I had a few issues when I first got it which down to experience I thought was down to the egr valve.
Had it back to AC under warranty and they said that it was...
My mate has a big problem, hes bought a mk1 focus duratorq 1.8 tdci 115bhp bout a month ago, all working smoothly and great runner when he bought it not problem, but last week or so he starting having performance problems and i think white smoke or could be grey coming from exhaust...
I have just purchased a complete Clutch, CSC and DMF, whilst it came with new bolts with the DMF, it didn't come with any for the clutch or csc. Ford state that all bolts should be replaced with new ones. As I don't want to remove everything to find out the sizes of bolts needed, can anyone...
I have recently bought a 2008 ford mondeo 1.8 TDCI that upon driving developed a missfire that was so bad at one point it caused the car to flash up "engine malfunction" and stall to a halt.
Upon taking it in to the garage (non ford) I was told there were no stored codes, and that it...
Recently I have noticed my car gives a jerk every now and then when driving along. It's as if there is a loss of fuel for half a second and it comes back again. This has been going on for a few weeks but I paid no heed in it thinking it might be water in the tank or something. Today I...
I have ford focus year 2003. Engine is Duratorque 1.8. Engine type: F9DA.
I'm searching for the fuel temperature sensor. This sensor is mounted on fuel pump (blue connector).
Sice now I have came across a sensor with code 4S4Q 9D995 AA. But this is supposed to be for MK2 focus car.
This is my first time on a car forum, which surprising as my last car was a vauxhall astra (but everyone has the same problems with those J).
Anyway, I bought a 60 plate 1.8Tdci zetec in april and overall I'm pretty happy with it. My problem is that at occasionally at around 2000 -...
I'm in the market for a 07-09 Mondeo (MK4) and couldn't decide between the 1.8 TDCi (125bhp) or the 2.0 TDCi (140bhp).
After a spot of research this is what I gathered:
1. Reliability: The 1.8 is the older but more reliable engine. Plus it does not have the troublesome DPF that is in the 2.0...
I have a 08 Mondeo 1.8 TDCI for about 4 weeks (140,000 km on the clock, recently serviced) and have had airlocked fuel 4 times in the last 5 days. On two occasions it recovered by cranking it several times on the other two occasions it needed to be to lifted to local garages (both Ford dealers)...
Just taken ownership of my 2008 Zetec 1.8 TDCI over the weekend and one of the first things I was looking at doing was getting a K&N induction kit for it. I was looking on the K&N website and on Demon Tweeks etc and the i57 kit is listed as compatible with the 1.8 Mondeo.
Have a ford focus zetec 04. Running rough as if on 3 cylinders all the time right through rev range. idles badly, trouble starting.
Diagnosis tests prooved all sensors ok
changed head gasket and checked valves which all looked ok
plugs leads and coilpack all changed.
cylinder one doesnt seem to...