Ford Automobiles Forum banner
abs
1-20 of 34 Results
  1. Electrical (Mk4 Mondeo)
    Hi, I need some help regarding Abs module programing in the car. What i presume that in Forscan i need load old data and write in new one, but the pump is different model from old one (from ab to fb). The As build file that i can load in new one and simplicity complete the task is not posible...
  2. Focus Mk3 General Discussion
    A few days ago I had a sudden intermittent ABS, Traction Control light pop up on the dash, now its on constant. I cleaned the sensors and checked the wiring for breaks, seems fine. I put it all back together and the fault cleared for about 10 mins. I stopped at traffic lights, pulled off and...
  3. Ford Cougar Forums
    Hi, I am in Australia. My lovely old Cougar has a puzzle. Intermittently the ABS and handbrake lights come on together, handbook says a serious brake fault. Happens once every three days or so. They seldom light up on a cold start, usually on a hot start and perhaps when parked on a slope...
    abs
  4. Electrical (Mk3 Mondeo)
    Hello, I have an old Mondeo mk3 2002 (hatchback). A few weeks ago the ABS started to kick in during regular braking on dry roads. After a minute or so the ABS light lit up and the ABS was disabled. After restarting the vehicle the fault was cleared but the ABS kicked in again instantly and the...
    abs
  5. Electrical (Mk4 Mondeo)
    Hi all, having problem with my Mk4 Mondeo Titanium X 2.0 TDCI. Both ABS and traction control lights on dash, plugged in OB11 reader and fault showing up as C1D17 - high power ground feed. Any ideas?
    abs
  6. Electrical (Mk4 Mondeo)
    Hi all. I have a Mk 4, 2.2 estate and have a faulty ABS module which is causing a battery drain (a diagnostic readout flagged this up). I need to remove the module attached to the pump so i can send it away to be repaired. Can anyone tell me where exactly it is and if its a relatively easy job...
  7. Suspension/Wheels/Brakes/Steering (Mk3 Mondeo)
    Can any let me know how hard it is to replace the rear wheel speed sensor on the MK3, my code reader says that's what's causing the ABS light come on occasionally, i'd rather try and fix/replace it myself rather than have the garage do it, I have bveen known in the past to be rather handy with...
  8. Ford Falcon Forum
    Couldn't workout which forum to use, please move if i've posted in the wrong one. Hi there, I'm trying to find some answers to wheel a wheel sensor may go overvoltage. The problem is in my brothers ford 1993 eb2 falcon fairmont (I think equivilant to Taurus). The abs light came on roughly a...
  9. Electrical (Mk3 Mondeo)
    Hi! My cluster reads zero rpm, speed, and has several warning lights.... getting the fault code : D262.. Can bus communication error.. I have tried changing the cluster and everything, nothing works... Have now measured the DLC on pin 2 and 10.... Im reading low resistance on both to ground...
  10. Suspension/Wheels/Brakes/Steering (Mk3 Mondeo)
    Hi thought I would post this as info for other Mondeo owners. Fault code C1155 could be a number of issues: Dirt around the sensor/bearing, damaged bearing, faulty sensor/wiring or the ABS module (Which costs a bomb) I had an issue whilst breaking at higher speeds where the ABS was kicking in...
  11. Suspension/Wheels/Brakes/Steering (Mk3 Mondeo)
    I've had a long running issue with my ABS firing when I'm far from locking the wheels. Having searched around it sounds similar to when others have reported sensor ring failures. In order to confirm if it's the sensor rings I've been monitoring the ABS module. All the wheels appear to be...
  12. Suspension/Wheels/Brakes/Steering (Mk3 Mondeo)
    hey I HAVE PUT MY QUESTION UNDER-NEIGH TO SAVE SOME PEOPLE FROM READING MY REASONING! AS I TEND TO RAMBLE ON A BIT well a few months ago my abs light came on,well we put the car on a diagnostic machine and it said it was the rear left abs sensor. well i noticed that the light only came on...
  13. Electrical (Focus Mk1)
    Hello, I am wondering if you can please help me, I have a Ford Focus Zetec 2000, 2L Mark one The traction control & ABS light has been on for some while now constantly, I noticed the other day when parked nose up on a hill that when I started the engine the lights were not on, but as soon as I...
  14. Mechanical (Mk2 Focus)
    hi all 2010. 1.6 lx. when I go into a right hander I get a clicking and whirring noise behind the dash. it has steadily got worse the last few weeks . no warning lights come on. if I shake the steering while running straight I get the clicking also. it sounds more electrical than mech...
  15. Suspension/Wheels/Brakes/Steering (Mk3 Mondeo)
    Hi, I have a problem with my MK3 Mondeo, 2.0 TDCi 96kW. ABS stopped working, I've checked the trouble codes and U2501 came back. Tried clearing the trouble codes, even though I didn't expect this to work, so I wasn't surprised when it really didn't. I've also tried changing the rear right ABS...
  16. Electrical (Mk4 Mondeo)
    The story If anybody is having traction control/abs issues with the front left wheel speed sensor and abs wiring, where the lights are coming on intermittently I have just found out the hard way that the engine wiring loom can suffer breaks behind the passenger side headlight(back of wheel...
  17. Suspension/Wheels/Brakes/Steering (Mk1/Mk2 Mondeo)
    Hello guys! I have a problem with my Mk2 Mondy that is driving me nuts for some time now :eek13: . ABS/handbrake light stays on after i start the car, but goes out as soon as i start driving. Could it be a faulty sensor or am i looking at a bigger issue here? Any help would be greatly appreciated!
    abs
  18. Suspension/Wheels/Brakes/Steering (Mk3 Mondeo)
    Hi there i went to change the abs sensor unbolted it etc but it was tight almost welded in,as i was trying to take it out the connector snapped off!!! now its flush with the hub and have no idea how to get it out and don't want to damage the abs ring. Any ideas? Regards
  19. Suspension/Wheels/Brakes/Steering (Mk1/Mk2 Mondeo)
    Hi all, I have a problem, but before I get into it, let me assure you that everything was working perfectly prior to what I am about to explain. I have a Mondeo II 2.0LX 1999 with very low mileage. I live in an area with lots of speed humps and small lanes with many other obstacles Having...
  20. Electrical (Mk4 Mondeo)
    Few weeks back my father in laws 2007 2.0 petrol mondeo whacked on the abs, skid and engine check light, my simple code reader (torque on my android phone) just came up with a generic speed sensor code from the main ecu. Took it to my dads garage and used a snap on diagnostic unit and discovered...
1-20 of 34 Results
Top