Ford Automobiles Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 8 Results
  1. Diesel Engines (Mk4 Mondeo)
    Hi, can anyone suggest or recommend make /brand of belt for the Aux belt? We had the idler pinion fail on our 2.0 Diesel 163 engine so the belt and pinion need changing. Also is it worth doing the tensioner and crankshaft pulley at the same time? It's done 123K but there's no reason to think...
  2. Diesel Engines (Mondeo Mk3)
    Hi everyone, Would really appreciate your opinions on this one: Recently changed the lower crankshaft pulley, tensioner and idlers, aux belt and also had the alternator and it's bearings refurbed. Car came back from garage, sounding ok on start up and driving, but there was a squeal whenever...
  3. Diesel Engines (Mondeo Mk3)
    can aux belt tesioner be adjust mine seem to be too tight
  4. Mechanical (Mk2 Focus)
    Hi there, so I have a mk2 focus 1.6 Ti-vct which is a 57 plate and just done 60k miles. I've read up that it will now need major work being done... so I need help on what work needs doing done, I know I need to do Cambelt and water pump, but what else? I want to get all major stuff done so...
  5. 1.8L / 2.0L Duratec Petrol Engines (Mondeo Mk3)
    I'm planning to change the idler pulley, but the bolt seems to be a bit (1cm) longer than the available gap between the pulley and the bodywork. Is there any trick to change it aside from lowering the engine or cutting the bolt :) thanks
  6. Diesel Engines (Mk4 Mondeo)
    Hi guys Just taken off my aux belt thinking I could quite easily find a diagram to put it back on but no such luck. Could any of you guys help me out? Its a 1.8 tdci 2009 Mondeo. Can only find diagrams for 2 litres+ Ta
  7. Diesel Engines (Mondeo Mk3)
    hi newbie here need some help from the pros!! I am changing the belt and the tensioner (on the right side of engine as you look at it) as power steering was notchy and noisey (long story short) took the old one off by just un doing the bolt for the tensioner. the bearing was knackerd and the...
  8. Diesel Engines (Mondeo Mk3)
    My tdci Mondeo is now just over 99k miles and needs an AUX/tensioner replacement soon. Anyone knows how long these belts last for as I cannot see any visible damage to it and no vibration or rattles from the tensioner at all. I owned the car from nearly new and the belt was never replaced...
1-8 of 8 Results