Ford Automobiles Forum banner
can
1-7 of 7 Results
  1. In-Car Entertainment (Mk3 Mondeo)
    Hi, all, short time lurker, long time appreciator, here. I'm struggling to get my Denso unit working, but this isn't actually a thread about that (because I'm a stubborn wotsit). I've nor yet found a decent description of *why* i should continue bothering, when the might be better...
  2. Electrical (Mk4 Mondeo)
    Hello, I've been having a problem with my Mondeo 2012 whereby the battery in my car keeps going flat. After a lot of investigation I have found that modules on the MS-CAN don't seem to be going to sleep. There is a LOT of chatter on ODB Pins 11 & 3 after the car has shutdown (Yes, all locked up...
  3. Diesel Engines (Mondeo Mk3)
    hi i have just done a egr blank and cleaned out my manifold,i have also cleaned all the pipes,i took a very long time doing so i have everything spotless i steam cleaned all of it!,i have replaced a few pipes also with silicone as they where cracked. what i have is a oil catch can to go...
  4. Electrical (Mk3 Mondeo)
    Morning Guys, I am looking for the pinout of the OBD diagnostics port under the drivers side dash on my '06 TDCI and google has been rather unhelpful. i was wondering if anyone has a wiring diagram or pinout that they could either send me or point me in the right direction. i am trying to see...
  5. Diesel Engines (Mondeo Mk3)
    I would like to put an oil catch can on my ST TDCI to stop any oil being forced back into the inlet tract. I am not here to discuss the benefits or downflls of doing such just after some advice from people that have already done this modification, do any of you have any pictures of where you...
  6. 1.8L / 2.0L Duratec Petrol Engines (Mondeo Mk3)
    Had a problem with my speedo showing 0 on the revs and speedo, along with some random lights (engine management / alternator light / Frost temp light) I was thinking that it could be a faulty speed sensor not sending information to the ECU, but my Ford dealer was quite sure that this model...
  7. Suspension/Wheels/Brakes/Steering (Mk3 Mondeo)
    Hi. I'm looking for the FINIS code of that type of alloys: I was searching into the Microcat and i suppose the FINIS is 1128279, but I'm not sure, because the image in Microcat is a little bit different: Can you help me with the FINIS code?
    can
1-7 of 7 Results
Top