Ford Automobiles Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-9 of 9 Results
  1. Ford Fiesta Mk7 Forum - (2008-2017)
    Hello All, I own a Mk7 Fiesta (2012, 1.6L, manual 5-speed transmission) since new and have recently come up with a few error codes. The code that concerns me is a U0401. I have searched around but am unable to find any hints on what that means for the Fiesta. In my search, I have seen a few...
  2. Electrical (Focus Mk3)
    Hi, hope you can help. I purchased a 64 plate Focus Titanium Eco Navigator earlier this month. It has the start/stop button so doesn't need a key to start. I was going through my paperwork and noted that I don't have a radio code and key code which I used to have with my old cars in case of a...
  3. Diesel Engines (Mk4 Mondeo)
    After 175,000 largely trouble free miles, my Mondeo 2.2TDCi had a badly rotted exhaust mounting. The exhaust itself was fine, so my local garage welded on a new piece of metal to support the exhaust. It may be coincidece, but next day the car put up a P2997 code, which is high voltage on the...
  4. Interior / Exterior (Focus Mk1)
    Can someone solve this one for me please,I have a 2003 mk 1 focus,1.6 lx. the paint code on the vin plate says O8 ,its a silver metalic of some kind ,tried moondust silver but its slightly lighter than that.I cannot find any reference to this code anywhere on the net,but plenty of other silvers...
  5. MultiMedia
    Hello changed starter motor and lost code for the sony mp-3 player serial number A11865404 can any one help with code regards WIL
  6. Electrical (Focus Mk1)
    Hi, ok my car Focus TDDi 52 would run fine, the odd morning it would start, then 10 seconds later revs drop then cut out - this happened about 3 times - weeks apart. The car would pretty much start fine straight after and no probs. Then this happened again but would not start up and hasn't...
  7. In-Car Entertainment (Mk3 Mondeo)
    Hi all, I'm looking at retrofitting the Denso sat nav system into my Mk3 FL Mondeo. I've read the relevant thread and wiki pages but I need to ask one thing before I shell out for a complete system. I've seen things about the VIN having to match on the Denso system for it to work properly...
  8. Electrical (Mk1/Mk2 Mondeo)
    My Mk1 Mondeo had a problem with stalling/rough idle on cold starts, so to save time I decided to purchase a Ford OBD1 code reader to diagnose the problem. I thought finding a compatible reader would be straight forward task given there are so many inexpensive OBD1 readers available. -- The...
  9. Diesel Engines (Mondeo Mk3)
    Morning all, started my mondy this morning and was greeted with flashing glow plug, no surprise really. Car is 2004 130bhp TDCi with 168,000miles Fault read as P0404 - EGR control circuit range/performance. It is lumpy and smokey on a cold start for about 30 seconds to a minute before it...
1-9 of 9 Results
Top