Ford Automobiles Forum banner
connector
1-9 of 9 Results
  1. Diesel Engines (Mk4 Mondeo)
    Hi guys, Pretty new to this forum even if I used to check this and other ford's forums for infos. So a giant HI to everyone and thank you for everyone has shared their ideas/guides/tips etc :rocker: I bought 2 years ago a Mondeo Mk4 - 2.0 TDCI 140cv. Car is solid and engine runs well. I'm...
  2. Electrical (Mk3 Mondeo)
    hey there so today I've been digging for the footwell lights wiring behind the glove compartment in my preface mk3 mondy (LHD) and I found some sort of a plug or an electrical connector. It's red, round, has three wires going into it and just sits slided in a plastic holder not connected to...
  3. Electrical (Mk3 Mondeo)
    The passenger seat heater works and the wiring connector looks like this The drivers seat connector has a black wire missing from the C60h position WHY? Has this been removed because it blows fuses? Has it ever been fitted? The switch lights up and there is 12v at the Relay position...
  4. Electrical (Mk4 Mondeo)
    Any idea what this one might be? Seated on the support beam below the right hand side (driver's side in UK and Ireland). This is on a 2008 Mk4.0 Zetec with the bog standard manually levelled halogens, so I doubt it's for DRLs, and the wires are too thin to carry current for xenon lamps. Would...
  5. Electrical (Mk4 Mondeo)
    Does anybody know if the connector on the back of the xenon headlights are the same as the standard halogen and halogen adaptive headlights? Cheers, David.
  6. Electrical (Mk4 Mondeo)
    Hi all. I have something a bit urgent :) How to unclip the mk4 Mondeo headlight connectors ? Have no idea at all and already snapped something :( I found some tips about pushing flat screwdriver inside but it didn't work . Please could anyone help me with this . Thank you.
  7. Lighting (Mk3 Mondeo)
    Hi, I have a ford Mondeo Mk3 duratec 2.0 Ghia 2002 model and am facing a problem with the left hand side xenon oem headlight, the wires have disintegrated from the headlight end connector. I have managed to fix new wires but dont know which wires go where as the headlight connector end wires...
  8. Electrical (Mk3 Mondeo)
    Morning Guys, I am looking for the pinout of the OBD diagnostics port under the drivers side dash on my '06 TDCI and google has been rather unhelpful. i was wondering if anyone has a wiring diagram or pinout that they could either send me or point me in the right direction. i am trying to see...
  9. Ford Puma Forums
    Morning chaps, Bit of a n00b question this - but I was working on the girlfriend's Puma yesterday and came across a slight problem. I was changing the nearside sidelight bulb - managed to remove the small plastic grille, and the headlamp unit with little issue - but I couldn't really see how...
1-9 of 9 Results
Top