Ford Automobiles Forum banner
cylinder head
1-4 of 4 Results
  1. 1.8L / 2.0L Duratec Petrol Engines (Mondeo Mk3)
    Hi guys, I've got a problem with my Mondeo where the engine has been cutting out of its own accord, however it restarts immediately without any problems. There are no warning lights on the dash prior to this happening and there doesn't seem to be any set conditions for it happening either...
  2. 1.8L / 2.0L Duratec Petrol Engines (Mondeo Mk3)
    What a sunday. Took my engine apart. fault on cyl 3. exessive oil burning, no compression etc. After removing the cylinder head this is what i saw. Piston 3 damaged, some 2.5cm part broke of the edge of the piston. Unfortunaly this part seems to have been inside the cylinder for quite a while...
  3. 1.8L / 2.0L Duratec Petrol Engines (Mondeo Mk3)
    I am trolling through the topics and finding it difficult to get a conformation of the size of the m-torx head bolts My set only goes up to T45 and guess that I should use something like a T65? or T70? Can anyone confirm please. Also, I found information on the bolts themselves. They have a...
  4. 1.8L / 2.0L Duratec Petrol Engines (Mondeo Mk3)
    Hi all, I need some advice/opinions on the condition of my cylinder head. My mondeo 2002 2L Duratec was using a lot of oil, so I decided to remove the head and do the valve seals. It's also had an annoying rumbling noise that I couldn't place, a bit like a misfire or leaking exhaust even though...
1-4 of 4 Results
Top