Search Results for ‘forscan’

L please see attached the pictrues of the code readings taking yesterday. Please advise on this. Thank you for your help and advice.

Hello! I have a big problem. My car is a Ford Mondeo MK4 2.0 TDCI. I changed succesfully engine software in BCM from 46. to 61. and I want relearn PCM form central configuration, but I don' t see this function :oops: PCM, IPC, BCM, ABS have DTCs... (incompatibility) also instrument cluster shows...

Hi all, I have a 2015 MK5 Mondeo 2.0 TDCI and recently got the cam belt kit and water pump done. All was fine for the first day after getting it done but went on a good bit of a drive the day after and of course I forgot to disable to auto start/stop before setting off. Stopped at the traffic...

Got faultcode p2263 turbo fault. No limpmode or fault on display, only when using forscan. Car runs great. Had a dpf that had to be changed due to ash and soot. When i remove a vacumhose close to airfilterbox the faultcode goes away. It's a Mondeo mk4 2.0 TDCI 131 hk 2007 model. What is...

Hi All, Can anyone tell me the process of updating the dashboard on the MK5 mondeo. I want to move the speedo in the the midddle. UCDS can do this but before I buy, I want to know roughtly what I need to do to make this happen. I can get the adaptor and software. Give it a look like this

Hello all, after having my 2013 Mondeo MK4.5 2.0l diesel serviced by Ford, who serviced the gearbox (oil and filter), I have noticed that when I get to the bottom of my driveway, and reverse up, the car shudders, and it's obviously the clutch slipping. The thing is that the car has never done...

Hi Guys, Hope you can help, I got a service now message on the dash and purchased a cheap clone to get the message out of the computer. It said that the DPF was blocked and needed to be serviced. I tried to run forscan but that didn't work with my clone dongle but did work with forscan for...

Hello guys, looking for the "As-built" data sheet for my Galaxy (2009, 2.0 TDCi, 103 kW). Anyone able to point me in the right direction? I have tried the Motorcraft web where it can be downloaded for some fords, but not for my one unfortunately... :-) Thanks a lot! Jan

Hi. I have Forscan for Windows and would like to do some small customizations to my 2007 Mk4 Mondeo 2.0TDCi 140 Ghia. I would like to do these - 1) Set the Mirror Puddle Lights to stay on for a longer time when opening and closing the car. 2) Automatically fold the mirrors when locking the...

Good Afternoon, I'm James, a long time listener, first time caller here at TalkFord. I have a problem with a Kuga 2.0 TDCI. I bought the car with about 36,000 on the clock, and it was serviced prior to delivery by the supplying garage. at about 43,000 and having done daily commutes of around...

ok so since i bought my f-super lead i have never been able to get a few of the menus i am missing ABS CLUSTER ICU THATS IN FORmidable in forscan i am missing HUD IMMO ABS AND I dont think i should have tcm this is on two different computers one with a fresh install of windows...

Thought I should share this since results of changing internal parts in common rail injectors are few or none on the forum. The car that I have been operating on was bought as a non-starter. Problem was diagnosed too high leak off by performing the test described in the wiki. It was fixed by...

Hi all, I have tried the combination of the above, and it worked in the first attempt! Really easy connection using a PC. I managed to run a KOEO and KEOR tests, and it all worked fine. However, for my Mondeo version it only had two modules installed - PCM and OBD2. I believe this has to do...

Hi Error ' cylinder 4 above knock threshold ' I have a 52 plate Mondeo TDCI 2.0ltr I know what the problem is and I know how to fix it but there in lies the problem. One of my injectors has lost its programming, it has done it before and I am shore it will do it again that is why I would...

Hi Guys, just testing the water here to see if theres any demand for this modified USB cable, I appreciate some of you will know this is a simple modification for someone to DIY who is technically minded and confident soldering/tinkering with electronics, however there are people out there who...

Hi Guys, just testing the water here to see if theres any demand for this modified USB cable, I appreciate some of you will know this is a simple modification for someone to DIY who is technically minded and confident soldering/tinkering with electronics, however there are people out there who...

Hi Guys, just testing the water here to see if theres any demand for this modified USB cable, I appreciate some of you will know this is a simple modification for someone to DIY who is technically minded and confident soldering/tinkering with electronics, however there are people out there who...

Hi Guys, just testing the water here to see if theres any demand for this modified USB cable, I appreciate some of you will know this is a simple modification for someone to DIY who is technically minded and confident soldering/tinkering with electronics, however there are people out there who...

Hello fellow members, another topic to cover now... I got a HUGE problem for a modern car, seems like nobody on my forest city have a compatible OBD2 Scanner for my Mk3, Mk2's are viable but can't make a Mk3 work with them (my car acused MAJOR INJECTION PROBLEM, something like that, but...

Hi all, I've found that ELM327 works on ALL mondeo mk3, so i'll just let you know this software. At the moment, the software can't recode injector, maybe in future release. The software is FORScan, you can download it here: http://www.forscan.org/home.html in the download page. I've tested...