Ford Automobiles Forum banner
hand brake
1-4 of 4 Results
  1. Suspension/Wheels/Brakes/Steering (Mk3 Mondeo)
    Well after months of work I'm finally done --- ALMOST! The old girl flew through her MOT with only a single advisory on a front tyre which I've now replaced. I think the hand brake lever return springs aren't as good as they should be as once caliper is sticking on ever so slightly but if you...
  2. Suspension/Wheels/Brakes/Steering (Mk3 Mondeo)
    Following on from my vid on the handbrake itself, here are the cables. This is an 'easy' job except for when you haven't done it before and every clip along the way is puzzle worthy of selecting MI6 recruits...
  3. Suspension/Wheels/Brakes/Steering (Mk3 Mondeo)
    Hi again, so I sorted out the squeak with the brakes, new seals and pads then bedded them in for a day - everything great. I decided to tighten up the handbrake as it gets a mention every time it's MOT'd so did that. Easy enough I thought but doing it lifting the side of the car meant not...
  4. Suspension/Wheels/Brakes/Steering (Mk3 Mondeo)
    Didn't use my car for a week and when I drove it next and took the hand brake off the lever is lose, only clicks near the end of its travel. Do I need to adjust the hand brake cable or is this a sign a Galilee has gone? I jacked the car up and both sides are locked with brake on but am not...
1-4 of 4 Results
Top