Ford Automobiles Forum banner
mk1
1-20 of 32 Results
  1. Mechanical (Focus Mk1)
    I am trying to identify the part name for this bracket which has snapped where it screws in just above the spark plugs. (Attach a couple of photos) Any idea what the part is so I can try and find a replacement please. Many thanks!
  2. Electrical (Focus Mk1)
    I replaced the motor blower heat resistor on my focus mk1 focus last week. This got the fan working again on all its settings, and the AC button lit up again. I replaced the pollen/ cabin filter too. I thought all was good - however, now on the lower fan settings there is a fume-like burning...
  3. Focus Mk1 General Discussion
    I have a Focus 2004 first gen which needs a service (over due). The oil ive been using is Mobil Super 3000. Theres been no issues with that (the 3-4 times that ive topped it up). I know they say go by the manual or as long as it meets specs. Are there any mechanics on here that work for Ford...
  4. Electrical (Ka Mk1)
    Hi all, Hoping someone might be able to help me. I've recently had an MOT failure on two items. 1) Brake Light 2) In car headlight adjustor/leveller not working Fairly confident in fixing the first fault myself, but was wondering if anyone knows how to fix the second. Essentially the dial...
  5. Mechanical (Focus Mk1)
    Hi I have a problem with my central lock, when I use the remote it works normally lock and unlock all doors, but when I use the key it lock only driver door and the other stay unlocked, any suggestion where is the problem?
  6. Mechanical (Focus Mk1)
    Hi all, first time posting here! I have a 2002 Focus 1.6L Petrol, which I have owned for over 7 years now, and have undertaken all mechanical work rather than pay a garage to do it, however after failing its MOT on two rubber boots (suspension ball joint and steering rack, both nearside), I...
  7. Mondeo Mk1/2 General Discussion
    It's been a long time since I posted on here, but I'm trying to work out how rare one of my Mk1's is. I bought a very tidy 1996 aubergine Ghia X 24v Estate earlier this year and the reason for thinking it may be extremely rare is it's an estate with a full phase 2 RS bodykit fitted, I know of...
  8. Mechanical (Focus Mk1)
    Hi Guys, Hoping someone can push me in the right direction. I drive a 2000 Ford Focus MK1 1.6 Zetec. And for the last several months there is a rattling noise in the car. It happens when it's put under pressure, i.e. pulling away from a traffic light, going up hill or even when we're on a...
  9. Mechanical (Focus Mk1)
    Hey, hows everyone doing? I just wanted to know if there's any point of me installing a K&N induction kit on my 2003 ford focus mk1 hatchback? This is the one I'm looking at: http://www.eurocarpa...44f403c6 I wanted to make the car run smoother and use less fuel and also get a deeper sound...
  10. Electrical (Focus Mk1)
    Hi All, Been having a nosey around for a few days now and bought a Mk1 2.0 Ghia as a second car to a company car but it has a slightly strange issue that I'm hoping someone here can help out with! If I lock the door by putting the key in the door then the car locks and there is no issue...
  11. Mechanical (Focus Mk1)
    Hi folks, Got another problem with my car, mk1 zetec focus 1.6. The biting point is very high and have to rev a lot to get going or else it'll stall. I was wondering if I bought this it'll fix the problem. Also how does a flywheel come into this, would i need it or is that something different...
  12. Mechanical (Focus Mk1)
    Hi folks, Got another problem with my car, mk1 zetec focus 1.6. The biting point is very high and have to rev a lot to get going or else it'll stall. I was wondering if I bought this it'll fix the problem. Also how does a flywheel come into this, would i need it or is that something different...
  13. Mechanical (Focus Mk1)
    Hi everyone, I have a 2003 Ford Focus Mk1 1.6, I wanted to get my brakes changed but i don't know which brands are the best for my style of driving. I'm a very, let's say aggressive driver, and I harsh brake and wheel spin occasionally so I wouldn't want my brakes to catch fire. I was looking...
  14. Mechanical (Focus Mk1)
    Hi everyone, Need some help with finding the best induction kit for my car. Did a bit of research and came up with K&N Induction Kit from euro car parts...
  15. Focus Mk1 General Discussion
    Hi, I'm hoping someone can help here. My 1.6 Focus recently failed its MOT due to the Lambda reading. 1.07 when it is supposed to be 0.97 to 1.03. All other readings are ok (HC 55ppm, CO2 14.19%, O2 1.42%) The garage recommended some injector cleaner put through it and "an italian tune up" to...
  16. Mechanical (Focus Mk1)
    Hi all, just replaced the two short banded pipes leading into my inter cooler, took car out and when I accelerate past 2000rpm in all gears the revs will jump to about 4500rpm with slow acceleration. It eventually speeds up and is normal again. Looks like oil is spraying out of the grill from...
  17. Electrical (Mk1/Mk2 Mondeo)
    I've been trawling the forums for a possible solution, but no luck. So now i'm hoping that the experts of TalkFord can guide me in the right direction. So, here's the case: The car has been working perfectly. I drove to work as normal and parked my car. When I left work, the car would't...
  18. Mechanical (Focus Mk1)
    Hi there My mate has a big problem, hes bought a mk1 focus duratorq 1.8 tdci 115bhp bout a month ago, all working smoothly and great runner when he bought it not problem, but last week or so he starting having performance problems and i think white smoke or could be grey coming from exhaust...
  19. Electrical (Focus Mk1)
    Hi guys, I used to be a member here years ago in the old FordMondeo.Org days :backthen:, but I can't remember my old account details... :darn: Anyway, I was hoping someone could please help with an issue with the father in law's 2000 Focus 1.6 petrol. He bought it a week ago, and since, I...
  20. 1.6L to 2.0L Zetec Engines (Mk1/Mk2 Mondeo)
    I have a 1994 Ford Mondeo Mk1. Recently it has become difficult to start. Previously it would start on the first turn of the engine. Now it requires 2-5 long bursts of starter. Sometimes it will catch and immediately die. Once it has started it's generally ok, except I have had once case of it...
1-20 of 32 Results
Top