Ford Automobiles Forum banner
mount
1-6 of 6 Results
  1. In-Car Entertainment (Mk4 Mondeo)
    Hi All, Am new here as I have just bought a 2012 MK4 titanium estate last Sunday after my MG went bang for the final time but noticed there wasn't a decent mount for a mobile phone due to the dash layout. I recently bought a 3D printer to mess around with and tried to design something I could...
  2. Interior / Exterior (Focus Mk3)
    Just wanted to share a quick fix for ball mounts that wear and won't keep the position: I Googled and found suggestions on putting paper or freezer bag plastic between the ball and the plate but the fit wasn't perfect and it did not last long. This works better: Pry off the mount plate from...
  3. Transmission / Drivetrain (Mondeo Mk3)
    As I was talking about before, ended up doing a few designs for an uprated lower bush for the engine mounts - getting there now, this one is far stiffer than the original but still has much, much better NVH control than the solid poly Rover 75 bush some of you tried switching to - mainly because...
  4. Diesel Engines (Mondeo Mk3)
    hi i have a 2002 mondeo 2.0tddi 115ps well as i have noticed on this forum my car is kinda rare in the fact the egr is mounted at the front like some tdci this is exactly what my engine looks like!,before anyone sais it i am 1000000% sure BTW THIS picture belongs to (adamw5433) my egr is...
  5. Suspension/Wheels/Brakes/Steering (Mk3 Mondeo)
    I have recently had a coil spring brake so I have replaced it. However, I failed to read previous posts and I have put the top mount on without the arrow/markings facing the front of the car. Is it possible to lower the mount enough to turn it to the correct position without taking it all...
  6. Suspension/Wheels/Brakes/Steering (Mk3 Mondeo)
    I have recently had a coil spring brake so I have replaced it. However, I failed to read previous posts and I have put the top mount on without the arrow/markings facing the front of the car. Is it possible to lower the mount enough to turn it to the correct position without taking it all...
1-6 of 6 Results
Top