Hi everyone, Any fiesta mk5 petrol users - have you been able to get your fuel level reading through an OBD2 adaptor at all? I've bought and used a cheap ELM from ebay (cost about £10 at the time) for a few years, and can pull out everything from revs to accelerator position from Torque and a...

ok so since i bought my f-super lead i have never been able to get a few of the menus i am missing ABS CLUSTER ICU THATS IN FORmidable in forscan i am missing HUD IMMO ABS AND I dont think i should have tcm this is on two different computers one with a fresh install of windows...

Hi all, I have tried the combination of the above, and it worked in the first attempt! Really easy connection using a PC. I managed to run a KOEO and KEOR tests, and it all worked fine. However, for my Mondeo version it only had two modules installed - PCM and OBD2. I believe this has to do...

Hello fellow members, another topic to cover now... I got a HUGE problem for a modern car, seems like nobody on my forest city have a compatible OBD2 Scanner for my Mk3, Mk2's are viable but can't make a Mk3 work with them (my car acused MAJOR INJECTION PROBLEM, something like that, but...

As mentioned in the title, I drove through a puddle last night, slightly deeper than I thought, probably about 150mm deep travelling through at approx. 25mph and was wondering if these are the sort of errors that such an action would cause. 1) Drove through puddle, no problem for the rest of...

Hi! Happy Ford Mondeo MK3 (petrol) owner here :) My engine light went on the other day (fixed now, nothing important), which got me into the world of OBD2. I got quite excited, cause I'm a programmer, and messing with OBD2 sounded fun :) (still does, actually :) ) After a bit of research I...

Hi sorry for my initial post to be a question but was just wondering if the 2002 Ford Focus Zetec 1.4 CL OBD port below the steering wheel is OBD or OBD2? Just bought the car and the previous owner mentioned the ecu light occasionally came on when it was cold (also noted in the mot). Want to...

Hi, Does anyone knows how to change settings in a Mondeo Mk4 1.8 TDCI Zetec 2007? I would be interested in the followings: Cruise Control ON - After you start engine you have to push "Cruise Control ON" button each time, but this doesn't engages the cruise Control it just put's it in Stand-by...