I picked this 2006 (06) ST TDCI up in early August, had it MOTd 1st September which was the day my ownership was supposed to start properly and then all this trouble started.
I have spent forever and a day reading various forums about the P132B code. Most of it pointing towards the Mr...
Has anyone heard of or used Turbo Fap Cleaner?
Saw it today in my local garage and thought it my be worth a try for fixing my P132b error code before I try the Mr muscle method.
2005 Mondeo mk3 2.0TDCI
It's been noted recently that the formula in Mr Muscle (used in http://www.talkford.com/topic/215546-turbo-housing-mod-for-p132b-fault/ )
has changed - doesn't foam up so much and doesn't appear to contain Sodium Hydroxide, which is the ingredient that really does the job.
Well here's a...
So driving the other day and my car lost power, changed engine note and started to flash the glow plug light of doom.
After searching on here for a while I found it's a common issue. So far I have tried cleaning the turbo (although only with Innotec) and cleaning the EGR valve. The...
Last week I had my turbo cleaned out by my local garage. They used a product called innotec turbo cleaner, meant to be good from what I have read. Also they cleaned my egr valve. I had all this work done because of the dreaded p132b code. Well the problem I have now is that is when I put my foot...
Hi sorry I'm a new member here but wondering if anyone could help.... Last month I got an error code p132b on my 2.0 tdci mondeo. I'm fully aware that the code can be related to the turbo or actuator... My local garage have cleaned out my turbo using a product called innotec turbo cleaner...
Car: Mondeo 2.0 TDCi 115 BHP, 06 Euro 4
Fault P132B - stiff turbo vanes (actuator functioning OK)
Been trying to resolve the issue by moving the actuator arm back and forth, but every now and again, under hard acceleration, on comes the glow plug light...
Anyway, a few weeks ago...
2005 Mondeo 130 TDCI
Has anyone successfully cleaned the internals of an electronic turbo actuator? Any tips?
I've got fault code p132b and flashing flow light. Disconnected the actuator arm from the turbo and the turbo operates when the actuator arm is moved manually.