Ford Automobiles Forum banner
p2263
1-6 of 6 Results
  1. Diesel Engines (Mk4 Mondeo)
    Got faultcode p2263 turbo fault. No limpmode or fault on display, only when using forscan. Car runs great. Had a dpf that had to be changed due to ash and soot. When i remove a vacumhose close to airfilterbox the faultcode goes away. It's a Mondeo mk4 2.0 TDCI 131 hk 2007 model. What is...
  2. Diesel Engines (Mk4 Mondeo)
    Hey folks, not been around much lately. As sad as it is to admit, with all the little quirks and foibles, what was formerly my pride & joy is now *just* a car :-( It's done almost 120k miles, of which 70k are my own. For the last few years, I've had a sporadic P2263 error code and associated...
  3. Diesel Engines (Mondeo Mk3)
    long story shorter blew *** lighter fuse replaced fuse car would not start - clicking relay in main fuse box rac man fixed it but no turbo Fault code P2263 no turbo Turbo arm free to move ( ~ 2.5 cm ? ) turbo actuator plug has voltage any ideas how to fix...
  4. Diesel Engines (Mk4 Mondeo)
    Further to my earlier post: http://www.talkford.com/topic/230902-engine-stuttering-juddering-malfunction-light/ I experienced another case of engine juddering, followed by the engine malfunction light illuminating and the car going into limp mode this morning. This time I was ready with ELM...
  5. Diesel Engines (Mondeo Mk3)
    Hi all, appreciate anyones input on this annoying fault! Mondeo Mk3, 2.0TDCi 2004 I've been chasing a fault reporting as code P2263 on my obd reader and the only freeze-frame data that seems wrong is a Control Module Voltage of 14v.? Reading back data in real time with engine ticking...
  6. Ford Galaxy Forum
    Hello, I thought I would share my long (and costly) process of elimination to finding a solution to the problem with my Ford Galaxy mk3 2.0 TDCi on an 07 plate with 99k miles on the clock. Initially I had a DTC of P010F which related to air flow correlation problems. The DTC was triggered...
1-6 of 6 Results
Top