Hello, For those who are looking for bypass the A/C pump on a petrol 1.8 engine, this is the reference belt and their specs: Dayco belt part number 5060775 Rib Profile Straight Rib Metric Part 6PK1970 Effective Length (in) 77.56 Top Width (in) 0.82 Thickness 0.17 No. of Ribs 6 Rib Depth...

Hey guys First of all im sorry for my bad English, but here goes. So few years ago I inherited an old american car, a 1967 Jeep Wagoneer with a 5.3 liter V8 gas hog under the hood. Its been sitting in a garage for around 20 years now and I slowly want to start rebuilding it. So I started doing...

Hi, has anyone ever changed the PAS pump themselves? mine has gone, I'm wondering how big of a job it is? Cheers

Guys, please help if you can to stop me from going mad! My problem? Pushing the 'squirt water' button on the washer wiper stick was a bit of a hit and miss affair, sometimes it would deliver liquid loveliness, and other times, not even the sound of the motor. Then it finally gave up altogether...

Hello Ive been struggling with an issue on my 2.2 Mk3 mondeo TDCi for a while now and im just about ready to spend a lot of money on replacing the high pressure fuel pump. But i wanted some qualified opinions on the subject before i do so. The engine is having problems with misfire and rough...

Stumped Starting with a running 2002 TDCI 2.0l 130 bhp Mondeo. It had a new fuel pump a month or so ago, to get rid of P0251 fault (after other checks). Has run fine for weeks. Checking leak off again as I assume higher pressure may change leak off result (found it to be about the same)...

Hi all. I have a Mk 4, 2.2 estate and have a faulty ABS module which is causing a battery drain (a diagnostic readout flagged this up). I need to remove the module attached to the pump so i can send it away to be repaired. Can anyone tell me where exactly it is and if its a relatively easy job...

Hi guys, So some people may have noticed I posted a topic asking about a lift pump on my MK3 Mondeo 2.0L Estate. I was told by a garage that it didn't have a lift pump and the loom in the bulkhead needed replacing as it was frayed. Well turns out it does have a lift pump and they were lying so...

'57 plate 1.6 petrol Mondeo Mk 4 (owned from new, no other problems, serviced, low mileage for year) refuelled 69 litres from nearly empty which then refused to start at the Sainsubury's petrol station. Just lurched 1 metre forward and apart from 2 hiccups, nothing. Towed it home and have...

Hi, I really hope someone can give me some advice! The other week my Ford Mondeo 2002 TDDI Diesel Estate started spluttering and eventually cut out and wouldn't start again. The breakdown people looked at it, at first they said: 1) The fuel float got jammed and you ran out of diesel...

I was looking for this topic and couldn`t find it. I have problem with Mondeo steering pump. As I drive downhill and drive higher than 2000 RPM my steering pump produces very loud noise. I changed the pump and the noise stopped for a while, some months. And now it started again. Now it produces...

Hi Forum Members. I have been reading the very useful tips and information on this Forum since I got my mondeo 10 months ago, I like to think I can have a good go at fixing most problems but this one has me completely stumped so I would be really grateful for any help given! First a history of...

Hello all. Went to investigate a noise when accelerating, started unscrewing my undershield to find coolant dripping off it. As I lowered it it literally poured off of it. I'd checked my coolant level before going on holiday last week and it was fine. Anyway, after panicking for a bit I decided...

I need to replace the fuel pump / sender unit on a 51 plate Mondeo. How do I disconnect the fuel lines from the fuel pump/sender unit? I cannot seem to depress the 3 lugs that hold the connector in place. Is the a special tool can I get one can it be done without? The main reason for the info...

HI guys i am about to change my pas pump and water pump what is the best way for the removal and in what order ? what size sockets/spanners etc will i need to take both units of the engine? just want to make sure i have the right tools and method before i start. Thanks in advance

my cars steering has always been heavy since I brought it, after checking the power steering fluid and finding it to be rather brown I thought id change it... after reading online I put both pipes from the reservoir into a container I started the car and it all pumped out fine, did full lock...

Here's my problem... Bought my Mondeo Mk3 2.0 tdci 130, 05 plate in August 2012 with 44000 on the clock. 3 weeks ago it shuddered and cut out - wouldn't restart. We got it towed to the local garage who tested it (£90) and said that 2 injectors were returning loads of fuel and the other 2...

Hi All, I am new to this forum, if I have posted in the wrong place please move this topic. I have a 51 reg Mondeo 2.0 Zetec, about 4 weeks ago the car would not start after a short journey, it started to run for maybe a second or two then it cut out and would not start again, I rang the RAC...

Hi Guys, Need some advice.... The PAS pump is making quite a bit of noise and is occasionally cutting out as well... so definitely on its way out. My question is that do I change the Pump only or does anything else need doing as well ? My local mechanic says I need to change the pipes as well...

Hi everyone, I own a 2008 Ford Focus MK 2.5 (facelift model). The other day whilst driving I begun to notice a whining sound coming for the car. I left it and drove it again today and the sound is still there and seems to have become louder. Also, the whining sound becomes much worse when I...