Ford Automobiles Forum banner
removal
1-12 of 12 Results
  1. Electrical (Mk1/Mk2 Mondeo)
    I have read somewhere, that in order to remove the cigar lighter socket, it is necessary to remove 2 bolts/screws from the handbrake and from underneath the car, this allows release of the shroud/plastic centrepiece assembly. . I wanted to avoid this but anyone know of an easier way just from...
  2. Interior & Exterior (Mk1/Mk2 Mondeo)
    Hi all - After reading the forums as a guest for some time I've joined TF today to ask you all this question. How do I remove the foam rear seat from my 1998 Mondeo estate ? The foam pad is hinged under the front edge on two metal links which are anchored to the metal body by white plastic...
  3. Lighting (Mk1/Mk2 Mondeo)
    I need to replace the driver side headlight, I have read somewhere that the front support frame for the 2 headlights, can be sawn in two in the centre and reglued, to achieve this, is this true?. The alternative seems to be removing the bumper for access to the frame support bolts, a difficult...
  4. Electrical (Mk4 Mondeo)
    anyone here able to help as to how i get to remove the socket as want to put usb in its place but cant find a way in,i have removed rear ash tray just to reveal two small rubber gromets and that all,took two screws from centre arm reast nothing happening! pic below thanks
  5. Electrical (Mk2 Focus)
    Hi Guys/Gals Am looking to remove my denso satnav from my focus st mk2 pre facelift and replace It with an aftermarket unit. Now I know there's a few posts on this on the Mondeo mk3 sections however before I invest some money in this has anyone done this and got the climate controls all...
  6. 1.8L / 2.0L Duratec Petrol Engines (Mondeo Mk3)
    Here's about taking the infamous inlet manifold off :crazy: to complement some of the excellent guides elsewhere here - Will be doing a separate vid on the flaps, plus PCV compons.
  7. Ford Fiesta Mk6 & Fusion (UK) Forum - (2002-2008)
    Hey guys So i'm planning soon to paint all of my plastic trim body coloured (door handles etc plastic at the mo). One problem is that i have the pre-facelift wing mirrors (smaller ones, can barely see out them lol) Does anyone have any idea on how to remove these to make it easier to do the...
  8. Electrical (Focus Mk1)
    Hi, the other day loaded a CD into my 6disc radio and it doesn't show up as having loaded the disc. I subsequently can't eject the disc... is there a way to get that CD out, either removing the radio or another brilliant way? thanks
  9. Electrical (Mk3 Mondeo)
    I need to replace the fuel pump / sender unit on a 51 plate Mondeo. How do I disconnect the fuel lines from the fuel pump/sender unit? I cannot seem to depress the 3 lugs that hold the connector in place. Is the a special tool can I get one can it be done without? The main reason for the info...
  10. Diesel Engines (Mondeo Mk3)
    Hi Im a newbie to this forum. I have a mondeo 2.0 130 which has thrown up p132b. I had the actuator recon'd by the guy off ebay some months ago and we also did an innotec turbo clean however we did not separate the parts of the turbo to do this. I have been reading guides which show the two...
  11. Transmission / Drivetrain (Mondeo Mk3)
    Hi all,, brand neew on this forum!! needing aslight bit of assistance please!! I have a 2.0tddi Mondeo that has what seems to be a relutance not to vibrate rattle and knock!! Basically i have replaced over the past few weeks the front near side wheel bearings and CV joint. I just done the...
  12. Diesel Engines (Mondeo Mk3)
    Ok so I am new to this site, so I am hoping to get the help I need. I have a 2005 mondeo tdci and was driving along and suddenly the engine cut out. After a tow home I checked out the top half of the engine and the cam carrier was smashed. I removed the timing chain cover to discover the timing...
1-12 of 12 Results
Top