Ford Automobiles Forum banner
sci
1-4 of 4 Results
  1. 1.8L / 2.0L Duratec Petrol Engines (Mondeo Mk3)
    Hello, My 2005 Mondeo MkIII 1.8 SCI developed an engine management fault, which I've narrowed down to being the upstream lambda sensor. I've been told that the part I need is OZA659-EE43. However, the part on my engine appears to be unusual, and has 5 wires on it: red, white, grey, yellow and...
  2. 1.8L / 2.0L Duratec Petrol Engines (Mondeo Mk3)
    Right I have managed to lose my temper and break off the super glued fuel lines in the top of the sender unit that previous owner had done.. undone the ring, and the top bit has popped out, but is still connected to bottom of the tank inside ?? how does this bit come out?? tried givin a...
  3. 1.8L / 2.0L Duratec Petrol Engines (Mondeo Mk3)
    Car in question - 2003 Mondeo petrol 1.8 SCi with the direct fuel injection engine.. (nightmare engine) When cruising at approx. 2000-3000 rpm there is a slight jerkiness, hesitation, then it just looses power altogether and I have to change up a gear and take foot off throttle or it will...
  4. 1.8L / 2.0L Duratec Petrol Engines (Mondeo Mk3)
    I bought myself a 1.8 SCi a couple of months ago on a whim and have had a few problems since. First off was fault oil pressure switch, fixed. Last week the EML came on during low speed, low revs and low gear. Went to get the codes read and it showed a EGR valve error. The car was due for a...
1-4 of 4 Results
Top