Hey all, I've got some eBay replacement bolts for the inner end of the 'tennis racquet' arms that the springs rest in. The eccentric on the bolts is 90 degrees out of phase, if the widest part of one washer points to 12 o'clock, the widest of the other to 3 o'clock. Is this right? Or have I...
Searched various forums for some answers on this but not been lucky enough to find an answer.
About 3 months ago a quiet knocking started to occur when driving, not massively noticeable and would be easily drowned out by low volume radio. It was coming from drivers side and sounded as though it...
Replaced front suspension arm today. Was bed enough getting it out and a real nightmare getting the new one in.
Once complete started car and it made a noise as if it was missing, but it wasn't. Realised car was in gear... but it started.
No drive in any gear.
My thoughts. There was a fair...
I am new to Ford Forum, so don't judge me please.
Also, i am from Lithuania, so there might be some language usage issues.
Anyway, my MK4 2007 2.0 tdci has regulated ride height (sport/ normal/ comfort).
the problem is that i ran into a big hole and one (shock absorber?) was...
We started manufacturing polyurethane bushings in 1997 in South Africa. Firstly developing leaf spring bushings and then other related suspension bushings for the harsh South African conditions. The business grew in S.A. to cover the whole country and neighbouring countries. In 2000...
Get in touch with us over at psbushings.co.uk for some amazing deals on our quality polyurethane bushes. An amazing upgrade to any vehicle - big or small, on road or off.
Let us know if you need any more details, and we will be happy to help!
My car's getting on in miles with 200,000 fast approaching. Over the past year I've found the suspension has become quite soft, a lot of body roll around corners and losing grip quite easily.
I have looked at the usual suspects with suspension and had it checked at the local...
New to the forum. We started to notice a rattle in the front suspension of my wife's 2007 Fiesta Zetec.
I opened the hood and gave the car a jiggle. The centre top nut which holds the spring in place seems loose and moves up and down as the car does but it's not bottomed out in the...
I have one question: anyone knows the original brand of suspension parts for Ford Mondeo mk3?
I know that, in general, brakes system are all Bosch (discs, pads, calippers). I would like to know if the suspension parts are the same or if they are original built by Ford.
I've had my mk3 ST TDCI for over 5 years and lowered it on 40mm Eibach years ago. I've noticed for a long time now that the general ride of the car is very, very harsh. There is no give in the suspension at all over bump/potholes etc,. The car just shakes, bumps and judders over them...
My girlfriend's Fiesta failed MOT on both lower ball joints.
On her way home from MOT center she stop off and bought the ball joints from local shop. There are not the typical ball joints I'm used to. They don't have the typical setup, where it's held into the wishbone with 2 or 3...
It's a Mk3 estate done 212K and it knocks constantly at the rear. Vague and skips slightly sideways when cornering and hit a dip or sunken manhole cover/drain.
From what I've read it sounds like the mounting bushes.
Some sellers state same bushes for all Mk3s others state different for the...
i have a 2005 Fiesta TDCI manual that has a steering wheel wobble at 70mph.
I have had both wheels straightened and balanced.
Tracking checked and adjusted.
Both front springs replaced.
Both driveshafts replaced.
Wheel bearings replaced.
But it still wobbles and pulls to the left...
I have recently installed a set of H&R 35mm Progressive Lowering Springs on my MK3 Focus and my front suspension has developed a knocking or 'clunking' noise, mainly coming from the driver side strut. Has anybody else had this problem and could anyone help with solving it?
Just had both my top mounts replaced on my MK4 2008 2.0TDCi but now when i go over bumps etc i get squeaking from both front sides, a garage done these but i supplied the parts, i only asked to get the top mounts replaced nothing else (too skint).
This is the part i had done, i...
I'm new to the forum, so forgive me if this post (or similar post) has been answered numerous amounts of times.
I'm picking up my Mondeo on Thursday, and straight away, have left myself £1,000 to get the car lowered up to 100mm, maybe more depending on wheels (yet to be decided)...
i was wondering you know the pinch bolt at the bottom of the rear strut that goes onto the hub?
is it threaded into the hub or is it a nut and bolt? i was wondering because i ordered a bolt from ford i have still to go and get it but as far as i am led to beleive it is a nut and bolt.
me again, i have had a new set of discs and pads (mtecs, black diamond pads) all round about a year ago i started getting a steering wheel shake when braking so being under a year old i complained and got another set of discs from mtec, this was just over 5-6 months ago.
hi im new.... have a question about lowering my car... how much can i drop it by on standard shocks with lowering springs? one of my mates said he did it with his mk1 and lowered it 40mm on his standard shockers... and another guy who has same car as me said any lower than 35mm i'd need to get...
I'm thinking of buying a second hand Mondeo - probably a Mk4. Previously I had a Mk4 Ghia and I liked its soft ride.
My question is this - there are a lot of Zetecs around (but not many Ghias!), are Zetecs equipped with stiffer suspension, or is it just a trim level?
I once had a Mk3...