Ford Automobiles Forum banner
tapping
1-6 of 6 Results
  1. V6 Petrol Engines (Mk1/Mk2 Mondeo)
    Hi All, I'm sure this has already been answered in a previous thread and apologies for not looking hard enough! But i drove to town today (about 10 miles i think) and on the way back my car smelt like it was getting quite hot. The temperature gauge was still in the middle and it does seem to...
  2. 1.8L / 2.0L Duratec Petrol Engines (Mondeo Mk3)
    (A second attempt at getting some answers from this forum. Moderators: If you want you can delete the previous thread from yesterday: http://www.talkford.com/community/topic/244753-noise-from-a-pulley-or-auxiliary-belt/) Hi all! A couple of weeks ago I replaced the auxiliary belt, tensioner...
  3. 1.8L / 2.0L Duratec Petrol Engines (Mondeo Mk3)
    Hi all! A couple of weeks ago I replaced the auxiliary belt, tensioner pulley, and idler pulley on a Mondeo MK3 1.8L (pre-facelift, 2003). Lately, I have noticed a persistent "tapping" sound produced somewhere in the aux. belt area. The sound is quite obvious when idling on low RPMs, and...
  4. Diesel Engines (Mondeo Mk3)
    Thought I should share this since results of changing internal parts in common rail injectors are few or none on the forum. The car that I have been operating on was bought as a non-starter. Problem was diagnosed too high leak off by performing the test described in the wiki. It was fixed by...
  5. 1.8L / 2.0L Duratec Petrol Engines (Mondeo Mk3)
    Dear all, I am experiencing a bit of bother with my '05 plate 1.8 petrol Mondeo. When in low revs with slight engine strain there is a tapping noise coming from the engine, there is no rhythm to it and the more time i seem to spend in the lower gears (traffic or around the houses) the more...
  6. Diesel Engines (Mondeo Mk3)
    Hi everyone, I have a feeling I have one or more dodgy injector/s (black smoke when first accelerating, loud tapping noise as well, when accelerating.) Cured temporarilly for a couple of months when I coded them, but as bad as ever now. Can anyone point me to a 'how to' as far as a leak...
1-6 of 6 Results
Top