Hi I have a mondeo mk3 2002 tddi that has very poor acceleration/power, with scanner am receiving codes p0100 and p0235 for the iat and map sensors. Have looked all over to try to find the things and can't see them anywhere! Does anyone have pictures/videos to share demonstrating where to find...
I'm in the process of installing cruise control system in my 2001 TDDi.
Firstly, I checked the plug on the steering wheel, behind the airbag. There was a full row of pins. My car only used (I believe) 2, for the horn. I bought an airbag with the buttons for the cruise control. Fitted...
Hello, first time post I just bought an old 02 manual focus hatchback TDDI, it's in good condition and looks well looked after, drives well.
The problem I have is at low speeds the brakes feel like they don't have any assisted power and I have to really stomp my foot down, at higher speeds the...
I have a two MK3 Mondeo's, one 02 TDDI - 85kw, and other is 03 TDCI - 96kw (For parts)
My daily tddi have a bad dual mass flywheel (noisy), and i am wondering if the flywheel from my 03 TDDI will fit on TDDI engine.
Also i am interested to change the clutch and gearbox from 5 speed...
Reckon this is a common problem but as far as I know I think my EGR to Intercooler pipe has a split in it. I can feel the split in it underneath just after the first bend but just wanted to check I have the right pipe in mind. I have attached a photo (apologies if it's not clear)...
Long time lurker , first time poster.
Just trying to figure out this problem and need advice . I have a tddi engine with what im sure is a variable geo turbo . I need to know how to go about a bleed valve and boost gauge with this set up . Am i right in saying i can attach a T joint here and...
I recently bought this Mondeo, first one I've ever had. I am normally driving Volvo's, BM's, but wanted a change and something cheaper. I have to say i am actually pleasantly surprised. It is comfy and roomy.
But where i am stuck is;
1. Struggled with starting in anything from -3 and...
Hi Guys, selling my tddi mk3 Ghia X
Full heated electric leather seats
Alloys with nearl;y new tyres
New clutch and dual mass flywheel 8 months ago
Lots of new parts
Hi I have a transit connect LWB T220 1.8L TDDI (2003) and have just swapped the engine for a Focus TDDI and fixed a host of other issues.
All went very smooth. Motor started 2nd time (with a lot of smoke!) but now is great. :biggrin:
However...I have one question that is bugging me. :huh...
having a bad week with my MK3 Tddi :-(
All I wanted to do was change the power steering fluid due to the clunk/squeak that was occurring on full lock. The vehicle's done 207K so it could have been in there from new as I've not changed the PS fluid in the 64K I've had the vehicle...
i am wondering what other cars have the same projectors for the headlights as the mk3 mondeo?
just i have just retrofitted the factory hids and they are absolute rubbish!!
first i used 35w ballasts with a relay kit and the origional bulbs
then i decided to buy some phillips bulbs today...
Long time reader, first time poster
I'm the proud owner of a 2003 Ford Mondeo, pre-facelift MK3 Duratorq TDDi (90 BHP) with manual 5 speed trans. For those unsure, this is not a newer common-rail Duratec TDCi MK3, the 90 BHP was what seems a rather un-common, late variant of the...
so since i bought my f-super lead i have never been able to get a few of the menus
i am missing
THATS IN FORmidable
in forscan i am missing
AND I dont think i should have tcm
this is on two different computers one with a fresh install of windows...
i am wondering if anyone has ever seen these solar reactive windscreens? i cant even find any info or pics about them,i am due to ask for a new windscreen from my insurance but was told if i can wait i am better to wait for better weather as it will adhere better or something!
but i have...
Hi guys, hope this is in the right place. I've got a mondeo 2001 tddi - Long story short - I broke down, the car cut out, no fuel, lift pump wasn't running. Cut the wires, Put 12v directly to the lift pump and got it going, bled the pipes and car started fine. Drove it for an hour or so...
i was wondering you know the pinch bolt at the bottom of the rear strut that goes onto the hub?
is it threaded into the hub or is it a nut and bolt? i was wondering because i ordered a bolt from ford i have still to go and get it but as far as i am led to beleive it is a nut and bolt.
i just thought i would post a little warning to save some people some money!!
well i have had a good few haynes manuals we used to buy them for each car we bought,the only one we did not buy one for was the audi 80 because they did not make one for our model.
well when i bought the one...
i had good aftermarket parking sensors on my audi 80 i fitted myself,they where really good.
well i cant seem to find the same ones i had for the audi i managed to get two different sets that look the same but they are not as good and the tone (not that that matters) is different.
just a random question for you guys :offtopic:
i was wondering has anyone with a mk3 tddi or tdci manual ever bump started there car(push start)
the reason i ask is because when i kept getting a flat battery a while back(sorted now) i could not bump start the car!
before anyone says it,i...
i had a little issue with a starter motor i bought,i could not get it to line up properly where as the old one slid straight in!
well i have noticed something,there seems to be a batch of starter motors going about with a little cut out missing next to the holes the bolts go into!