Ford Automobiles Forum banner
wire
1-4 of 4 Results
  1. Electrical (Mk1/Mk2 Mondeo)
    I was working on my car radio the other day and I might have accidentally grounded the red wire which is supposed to give 12v when ignition is turned on. it does not seem to provide 12v in any state. all other wires seem to work as intended. I checked fuses #31 and #32 which this site tells me...
  2. Air-Con / Heating (Mk4 Mondeo)
    i have had the infamous p0691 code, as a result the aircon does not work as the fan wont come on when it is switched on, i can see where the purple wire in question ends up in the cooling fan, i have read that this wire goes straight to the ecu/pcm, which connector and pin does purple wire end...
  3. Electrical (Mk3 Mondeo)
    I recently decided to find out why only one half of my windscreen quickclear works. I checked the fuses, no problem. Removed the plastic grille from the front and voila, there is a loose wire! There are two wires on either side, one seems to run up the side of the window to I guess the top and a...
  4. Towbars/ Trailers/ Caravans / Campers
    Hi. I am in the process of installing a aftermarket towbar and wiring to my 2011 Mondeo estate mk4. The towbar went on easily and I'm about to start the wiring. I need to be able to connect into all the rear lights/indicators but want to avoid having to run cable to each light etc. Is there a...
1-4 of 4 Results
Top