Ford Automobiles Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter · #1 ·
Evening all.

The car is a mk1 Kuga 2010 with the euro5 spec engine in Zetec trim which unfortunately didn't have cruise control fitted from the factory.

How much work is involved in adding cruise control (and preferably speed limiting) to it?

Looking on the mk4 Mondeo forums they seem to come with various buttons on the steering wheel itself, some of which need to be changed along with the loom in the wheel, then a wave of the Forscan wand and off you go.

My only issue is that my car has all the buttons mounted on the steering column, so hardware-wise is it still just a case of getting hold of the right button panels + loom or is it likely to be more complicated than that?

Cheers

Nick
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top