Ford Automobiles Forum banner
1 - 10 of 10 Posts

·
Megger
Joined
·
212 Posts
Discussion Starter · #1 ·
Managed to get an auto dip mirror off ebay but that's all I got :alert:

I know I need some form of electrical connection and a mounting thingy :whistling: but can anyone let us know is the electrics part of a loom or an add on bit with a plug each end available from fords and if anyone can help with the finis code for the mounting thingy would be greatly appreciated :L
 

·
MEG Captain
Joined
·
4,819 Posts
a good place to start is what mk of mondeo have you got , i.e. mk 1 2 or 3 :L
 

·
LED Extraordinaire
Joined
·
8,458 Posts
Live from the car illumination, ground from the courtesy light and the third wire is for the reverse lights i believe.
 

·
IDS SERVICES AVAILABLE - DENSO SPECIALIST
Joined
·
3,444 Posts
and the mounting plate you can get from Ford

FINIS Code - 4560785 @ £3.63 ex vat

best stuff to stick it with is Rear view bonding kit thingy from Halfrauds at £4 (the one with the tube and the mesh)
 

·
MEG Commander
Joined
·
6,006 Posts
See my 'HOW TO' in the workshop section :L

Steve
 

·
MEG Commander
Joined
·
6,006 Posts
Wiring for a MK3 mirror from my scribbled on bit of paper is:
Pin 1 Green/ black wire - Ignition live
Pin 2 Black - Earth
Pin 3 Green/ red wire - feed from reverse lights.

HTH
Steve
 

·
Megger
Joined
·
212 Posts
Discussion Starter · #8 ·
Cheers guys :L just one problem I have no wiring :whistling:

just mirror with a hole for a multiplug :blush:

Is the wiring part of the loom or is it an add on piece with a plug each end

Thanks :thankyousign:
 

·
IDS SERVICES AVAILABLE - DENSO SPECIALIST
Joined
·
3,444 Posts
i think i may have a spare plug, you can wire it in via the 'How To'.... with just a short piece of wiring...
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top