Ford Automobiles Forum banner

aws system - pin out required

2173 Views 11 Replies 3 Participants Last post by  manyx86
if anybody has a list of these it would be appreciated, got the pin list for bulb failure module but need help with the rest of the system
1 - 6 of 12 Posts
do you mean just send them to an earth point? was speaking to a ford auto electrician the other day and he gave me a circuit diagram that mentioned a shorting bar behind the dash, how do i reach this or would i be ok just sending to an earth point on the bodywork as that is all the other side of the connection runs to
i'll have a go at this over weekend, on the small connector am i right thinking the black/yellow and white/blue wires both go to earth with the four violet wires running to pins 3,4,8 and 9 of bulb failure module
im gonna attempt the bulb failure module got all the pin outs already, is it a case of running wires to each corner of the car and just splicing into the existing wires behind each light unit, only other thing im unsure about is where the bulb module sits, ive heard in the passenger footwell but where abouts?
1 - 6 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.