Ford Automobiles Forum banner

Disconnection of push pull heater cable from flat pivot.

579 views 1 reply 2 participants last post by  PURPLE_2L_LX 
#1 ·
Can anyone please tell me how this heater flap control cable disconnects from the operating arm. When I blew the photo up it looks there is a sort of spring clip at the hand side.
 

Attachments

See less See more
1
#2 ·
pull the inner cable out and push the black bead on the end away from the fixing whilst bringing the arm
closer to the fixing the bead then slides out the far end.

The clip on the housing will pop free on the right hand side once the cable is loose. Gently with a screwdriver.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top