Ford Automobiles Forum banner

front fog light "blanking plates"

1539 Views 4 Replies 4 Participants Last post by  Col_Tubbs
my mondi has no front fog lights just the "triangle" shape blanking plate things.
Do the fog lights of this shape just fit straight into the hole when the covers are off?, and how easy would the wireing be?, of course i will need to change the light switch inside so i have front fog on/off.
Would prefer the round ones but how would they fit?
1 - 5 of 5 Posts
2
These are the type that you need :



You will also need the loom that connects the two together & you need to changeover the headlight switch and that's it.

I have these up for sale, see this :

http://www.fordmondeo.org/forum/showtopic.php?tid/829751/tp/1/

But a fellow meg member has 1st claim on them, if he decides he longer wants them,(they have until Thursday), then they are up for sale.

Attachments

See less See more
I don't know if you sorted your front fogs but I did this conversion the wiring loom which connects the two fog lights fit into a plug on the n/s under the battery shelf it had an orange blanking plug in it.The grills are just clipped in place but the fogs have a securing screw fiied to the bottom if you,ve already done it then sorry for telling you how to suck eggs
regards
Billy
Slightly off topic but changing from pre-face lif bumper to facelift bumper. Understand the wiring looms are the same for both sets of fog lights, am I correct in assuming the switch is the same?
OurKid85 said:
Slightly off topic but changing from pre-face lif bumper to facelift bumper. Understand the wiring looms are the same for both sets of fog lights, am I correct in assuming the switch is the same?
Yep, it's the same. :L
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top