Ford Automobiles Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
46 Posts
Hi everyone.
I'm trying to fit a hardwired dash cam. The model I'm using has an internal battery to power it's "parking mode".
Does anyone know which fuses (in the panel under the glove box) are only live with the ignition on?

For added fun, F59 - F63 are a no go because there's a cable plug too close to the sockets to get the 'jumper' fuse holder in.

You'd think it would be easy, but I don't know whether the door being open is keeping stuff live, or even if certain things stay live for a while after the ignition is off.

It's driving me nuts.

Ignore the Mondeo avatar. It's a 2017 Kuga Vignale I'm wrestling with now.
 

·
Registered
Joined
·
1 Posts
A little bit late in the day but this will help you. Use fuse 85 in the fuse box located inside the car on the passenger side. It's located just under the glove box. There are two plastic clips to pull down thus releasing the carpet covering. The fuse box is located slightly to the right with F85 on the right of the box.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top