Ford Automobiles Forum banner
1 - 12 of 12 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hi All,
im new to the forums and also new to mondeos so please go gentle with me :)

i have a Ford Mondeo, S-reg (2001), 2.0l Zetec
the question i have is i know with vauxhalls they tend to fit the same wiring loom to the bog standard cars as they do the luxury models, is this true on the mondeos?

i was hoping to get cruise control fitted but really dont know what is involved in it?

I fitted cruise control to my Vectra (it was as simple as changing the indicator arm and having a Tec2 reprogram of the ECU done) is it more or less the same case with the fords?
 

·
Registered
Joined
·
974 Posts
its not that easy on a mondeo, you need a new steering wheel with cruise buttons and airbag, new set on pedal switches, instrument interface module, cruise module, trottle cable and a lot of wiring, can normally pick these kits up on auction sites for anywhere between £40 - £80, ive got a set of instructions i can email if you want
 

·
MEG Admiral
Joined
·
3,112 Posts
I am trying to get this done on my Mk1 Mondy too. Any chance you can email me a copy of those instructions. I have the Steering wheel with the controls but nothing else.
 

·
Registered
Joined
·
974 Posts
what email address do you want me to send the instructions to, this is possible to fit onto a v6 but you need a shorter cable to run from the cruise module near passenger side suspension to the throttle, the 4 cylinder version required a longer cable
 

·
Registered
Joined
·
145 Posts
[quote name=mondeo.man662]Oli, i dunno if its possible on urs??

Have a chat with lee cos i was on about ya never see a v6 with cruise :L

Wibble[/quote]

my old car had cruise! Mk1 V6. :L
 

·
IT guy with dirty hands!
Joined
·
574 Posts
[quote name=mondeo.man662]Oli, i dunno if its possible on urs??

Have a chat with lee cos i was on about ya never see a v6 with cruise :L

Wibble[/quote]

yeah its possible.. exactley the same as a 4 pot except for that the actuator cable is shorter..
 

·
Never knowingly understood
Joined
·
23,164 Posts
noisy_cricket said:
mondeo.man662 said:
Oli, i dunno if its possible on urs??

Have a chat with lee cos i was on about ya never see a v6 with cruise :L

Wibble
yeah its possible.. exactley the same as a 4 pot except for that the actuator cable is shorter..
For either the 4-pot, or V6 you need the following bits from a donor car:

Cruise type steering wheel
Matching clockspring
Foot-pedal switches (with their plugs & part of the looms)
Actuator (with the plug & part of the loom)
Actuator bracket
Short throttle cable (V6), or Long throttle cable (4-pot)

I've recently sourced these bits for a MEGger here... cant remember who tho :whistling:
 

·
IT guy with dirty hands!
Joined
·
574 Posts
MScotts said:
noisy_cricket said:
mondeo.man662 said:
Oli, i dunno if its possible on urs??

Have a chat with lee cos i was on about ya never see a v6 with cruise :L

Wibble
yeah its possible.. exactley the same as a 4 pot except for that the actuator cable is shorter..
For either the 4-pot, or V6 you need the following bits from a donor car:

Cruise type steering wheel
Matching clockspring
Foot-pedal switches (with their plugs & part of the looms)
Actuator (with the plug & part of the loom)
Actuator bracket
Short throttle cable (V6), or Long throttle cable (4-pot)

I've recently sourced these bits for a MEGger here... cant remember who tho :whistling:
That would be me.. :gayfight: :whistling:
 

·
MEG Admiral
Joined
·
3,112 Posts
Pete my email address on my profile will be fine. Thanks mate.

Haven't got a clue what Lee has got for it yet so don't know what he is missing Jamie
 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top