Ford Automobiles Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 · (Edited by Moderator)
help please car broke down couldn't start it until i reset it in forscan did a regen which completed but failed to complete as said vaporiser fault (code forgot) anyway found a hole in front cat replaced it and cleaned vaporiser started regen and car stops after 5 mins interrupted my dpf values are 55.00 soot level after reset the dfp values car starts ok any ideas

noticed that when in regen white smoke and a smell of diesel through the exhaust is this natural should the vaporiser burn diesel off
 

·
Super Moderator
Joined
·
29,780 Posts
Check the exhaust temperatures during the regen, also its not a good idea to

static regen when its really clogged.

The temperature could get too hot and damage the DPF.

There should be 3 or 4 soot readings.
 
1 - 2 of 2 Posts
Top