Ford Automobiles Forum banner
1 - 9 of 9 Posts

·
Little Megger
Joined
·
91 Posts
Discussion Starter · #1 ·
hi all,
my mate has a p reg mk2 2.5v6 and was suffering from the blower only working on no4.i told him to go and buy a new resistor pack from ford, he did just that today.
but the guy there said the part has been super seeded and he may need to buy a length of wire (must be special as he tried to charge my mate £6 for it.lol)anyhow any1 know what this extra bit of wire is?? or indeed if its needed at all,if it is, would a normal piece do the job spliced into what ever it needs to go into???
cheers all
pat.
 

·
Never knowingly understood
Joined
·
23,164 Posts
If you can, return the bits bought from Frauds mate...

Sent a Private Topic (PT) to 'JD', he sells both the resistor pack & plug with the loom :L :L :L

Andy
 

·
Little Megger
Joined
·
91 Posts
Discussion Starter · #3 ·
just fitted the one my mate got from ford...fitted straight in.
so i dont know what bit of wire the sales guy was on about????

works fine.

pat.
 

·
MEG Corporal
Joined
·
752 Posts
The bit of wire you plug into the resistor can sometimes melt when the resistor blows.

Therefore sometimes you need to replace BOTH.

Never heard of just replacing the bit of wire!
 

·
Big Megger
Joined
·
112 Posts
Got both bits for mine yesterday from Ford. Just need to fit it now, I am getting fed up with using the heater on 4 all the time.
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top