Ford Automobiles Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Hello. First time on here so here goes... I drive a RHD Capri 1600xl OHC,first registered in Jan 1974. I was having problems with my oil pressure (idiot) light being permanently on,after a period of flickering.Managed to source a new sender unit and it was an easy job to swap out old for new. My question is;what should I torque it up to? I can find nothing in my old Haynes manual on it, besides it appears in one of the exploded diagrams,but no torque settings.I don't want it to leak and I certainly don't want to over do it. Help appreciated.
 

·
Super Moderator
Joined
·
29,809 Posts
I dont have the exact figure, but it should be in the region os 15 - 20ft/lbs

Use a short ratchet and just nip it up.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top