there might be a few more to check: http://www.fordwiki.co.uk/index.php?title=Fuse_%26_Relay_Information_-_Mk4

if you have the radio code etc, it might be worth disconnecting the battery, having a brew and then reconnecting it again, as this often resets modules etc... (static can upset them)

I think you may need to reset global closure, window up/down limits etc upon reconnecting too.

 

+1 with sir uncle. I had similar a few days after buying mine. My little one likes to sit in the back with the window down. I noticed him pull on the window one day. The result was the window stopped working and that particular door wouldn't lock. I did a reset bi disconnecting the battery and it came to life

 

Thanks guys. Will disconnect tomorrow and give that a try.

It's a nightmare as it is without being able to open any windows using the controls on the drivers door and having to mess around with locking it is a pain too!

Got a door lock mechanism from the scrappy and hooked that up today but it made no difference to hopefully the old faithful turn it off and turn it off again may do the trick

 

There's a way of resetting them properly. I know it's something about holding the negative battery lead on something. Sir uncle will be the one to ask tho. If not I think it has to be left disconnected from the battery over night

 

Thanks guys. Will disconnect tomorrow and give that a try.

It's a nightmare as it is without being able to open any windows using the controls on the drivers door and having to mess around with locking it is a pain too!

Got a door lock mechanism from the scrappy and hooked that up today but it made no difference to hopefully the old faithful turn it off and turn it off again may do the trick

Here's the window reset in case you couldn't find it.

http://www.fordwiki.co.uk/index.php?title=Global_Closure